GA2002 Pocket Vibration Meter
- PDF Downloads
The GA2002 Pocket Vibration Meter is Reliable, repeatable and simple are three important criteria most people have when looking at taking vibration measurements. The GA2002 offers this on a plate and at a price unbeatable for what you get. This Instrument will give you all the fundamental vibration measurements in many of their variations using single key strokes. This makes it perfect for general machine and bearing vibration monitoring as well as other general-purpose vibration measurements.
The GA2002 is an industrial grade vibration level indicator featuring 3 basic parameters for acceleration (displayed in g), velocity (displayed in mm per second), and displacement (displayed in µm).
The unit has two operating ranges (Low and High), independently selectable for each parameter, with the High range giving a x10 resolution step against the Low range. For acceleration, this would give a Low Range span of 0.01 to 10g, with a corresponding High Range span of 0.1 to 100g.
The unit has an overall tolerance of ± 1.5dB for the primary acceleration function, showing a display resolution of 3 figures with a ‘floating’ decimal point giving two places for readings below 10, one place for readings above 10, and no decimal place for readings at 100 or above.
There is a further ± 10% tolerance against the velocity and displacement integrator circuits. The display resolution figures for velocity and displacement are the same as for acceleration.
The uses for this instrument are far-reaching and widespread. One prime example would be a maintenance operator verifying results from a fixed monitoring system or taking measurements for maintenance prediction. Another example is a construction engineer checking that the vibration from a piling operation is not exceeding any environmental thresholds.
|Accelerometer||Piezo-electric (10pc/g)||Acceleration Range||0.1 to 1000 ms-2 (0.01 to 100 g)||Velocity Range||0.1 to 1000 mms-1||Displacement||1 to 1000μm (Above in RMS or Peak and in 2 ranges)||Mechanical Filter Frequency||10Hz - 1KHz||Linear Filter Frequency||10Hz - 10KHz||Memory||Non-volatile E2PROM memory which holds calibrationdata plus storage of 9 spot results||Keypad||9 Key Tactile Keypad||Standards||BS6842 Compliance with EMC CE marking||Display||8 Character LCD Display||Parameters||Acceleration, Velocity, Displacement||Filters||Mechanical & Linear||Detectors||RMS and Peak||Displays||rms, Lmax, Lpeak||Overload Indication (Flashing Display)||Battery condition indication, Low Battery(Flashing alternate display), Hi/Lo range||Batteries||1 x IEC No 6LR61 (Upto 40 hrs life with Duracel MN1604)||Calibration||Simple calibration offset accessed from thekeypad and stored in the non-volatile memory||Weight||250g with batteries||Size||135mm x 62mm x 30mm||Batteries||1 x IEC No 6LR61 (Upto 40 hrs life with Duracel MN1604)|