Vib Meter 320 Vibration Analyser

Vib Meter 320 Vibration Analyser


  • Description
  • Specifications
  • PDF Downloads


The Vib Meter 320 Vibration Analyser is an entry level CBM tool, but don’t be fooled! – one press of a button and the Vib Meter 320 displays a colour coded ISO reading in mm/s and shows the bearing damage, for more advanced users there’s even an 800 line spectrum with cursor as well as alarms for unbalance, misalignment and looseness.


  • Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition
  • Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as unbalance, misalignment and looseness
  • The Vib Meter 320 represents the very latest in technology with up to 800 lines of FFT resolution and fully zoom-able vibration spectrum display
  • The fully dynamic cursor displays frequency and amplitude values
  • Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory
  • Run speed and machine type are entered with the simple to use Setup Wizard
  • Built-in accelerometer

Size 200 mm x 60mm x 26mm
Water, Sand & Dust IP67 Waterproof
Operating 0ºC to 50ºC
Storage -20ºC to 70ºC
Power supply 2 x AA batteries
Battery life Auto power OFF - typically 50 hours operating time depending on brightness setting
Frequency range 2/10 Hz to 1 kHz (ISO), 1 kHz to 10 kHz (BDU)
Max Frequency Resolution 1.25 Hz @ 800 lines FFT setting
Displayed Vibration Amplitude Units Acceleration in g, Velocity in mm/s (or inches/s), Bearing noise in BDU (bearing damage units)
Displayed Frequency Units Hertz (Hz), RPM or CPM
Input Range +/- 50g
Dynamic Range 72 dB (0.05g resolution)
VA Diagnostic Bands: (RS= run speed) Unbalance 1x RPM, Misalignment 2x RPM, Looseness 3x RPM

PDF Files Available to Download


With effect from January 1st 2018 our Instruments will not include AAA and AA Batteries. Dismiss